MC10H124 |
RFQ for MC10H124 Required Field |
 |
| Technical/Catalog Information | MC10H124FNG |
| Vendor | ON Semiconductor |
| Category | Integrated Circuits (ICs) |
| Package / Case | 20-PLCC |
| Packaging | Tube |
| Input Type | TTL |
| Output Type | MECL |
| Supply Voltage | 4.75 V ~ 5.25 V |
| Data Rate | - |
| Number of Channels | 4 |
| Operating Temperature | 0°C ~ 75°C |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MC10H124FNG MC10H124FNG MC10H124FNGOS ND MC10H124FNGOSND MC10H124FNGOS |
| Product | Manufacturers | Pack | D/C |
| MC10H124 | - | PLCC20 | 07/08+ |
Typical Application |
Features |
| The MC10H124 has TTL−compatible inputs and MECL complementary open−emitter outputs that allow use as an inverting/non−inverting translator or as a differential line driver. When the common strobe input is at the low−logic level, it forces all true outputs to a MECL low−logic state and all inverting outputs to a MECL high−logic state.An advantage of this device is that TTL−level information can be transmitted differentially, via balanced twisted pair lines, toMECL equipment, where the signal can be received by the MC10H115 or MC10H116 differential line receivers. The power supply requirements are ground, +5.0 V, and −5.2 V. | •Propagation Delay, 1.5 ns Typical•Improved Noise Margin 150 mV (Over Operating Voltage and Temperature Range)•Voltage Compensated•MECL 10K−Compatible•Pb−Free Packages are Available* |
|
Symbol |
Characteristic |
Rating |
Unit |
|
VEE |
Power Supply (VCC= 5.0 V) |
−8.0 to 0 |
Vdc |
|
VCC |
Power Supply (VEE= −5.2 V) |
0 to +7.0 |
Vdc |
|
VI |
Input Voltage (VCC= 5.0 V) TTL |
0 to VCC |
Vdc |
|
Iout |
Output Current− Continuous − Surge |
50 100 |
mA |
|
TA |
Operating Temperature Range |
0 to +75 |
|
|
Tstg |
Storage Temperature Range− Plastic − Ceramic |
−55 to +150 −55 to +165 |
